Definition of Lubricating Condition (1) Non-lubrication Without using grease or oil. Only a small amount of grease and oil at assembly. (2) Periodical lubrication Feeding grease or oil periodically (3) Lubrication, Forced Lubrication Feeding oil or grease to sliding face aiways: In oil, fed lubrication, splash lubrication, forced lubrication

Range Field (Values below are obtained in the air, bushing, shaft revolution)

* Static allowable pressure: Indicate allowable pressure without sliding or with sliding less than 0.0016m/s at low temperature

Product Name

Pmax. N/mm2 { kgf/cm2}

V max. m/s { m/min}

PV max. N/mm2 { kgf/cm2/m/min}

Service temperature range

Lub state

In the air

In the oil

Under water

Under seawater

In-chemi-cal liquid

Corro-sive

Standard Product Code

OILES Drymet ST

24.5 {250} *137 *{1400}

1.15 {69}

3.25 {1990}

-40 ~ +120

Non-lub

×

×

×

×

Drymet ST Bushing 70B Drymet ST Washer 70W Drymet ST Plate 70P

OILES Drymet LF

49.0 {500} *137 *{1400}

0.65 {39}

3.60 {2200}

-200 ~ +280

Non-lub

×

Drymet LF Bushing LFB Drymet LF Flange Bushing LFF Drymet LF Washer LFW Drymet LF Plate LFP

OILES LF Guide

Allowable maximum load W N{ kgf} Dynamic : 235 ~ 1323 {24 ~ 135} Static : 706 ~ 3969 {72 ~ 405}

0.67 {40}

Non-lub

×

LF Guide LFG

OILES Techmet

19.5 {199} *137 *{1400}

2.50 {150}

1.45 {887}

-50 ~ +200

Non-lub

×

×

×

×

Customized Product Techmet Bushing TCB

OILES Lumet

49.0 {500 *137 *{1400}

4.15 {250}

24.50 {15000}

-200 ~ +280

Non-lub

-

-

-

-

Customized Product

OILES Toughmet

24.5 {250} *49 *{500}

0.40 {24}

1.65 {1010}

-40 ~ +350

Toughmet Bushing TMB

OILES Techno-light

49.0 {500}

1.00 {60}

1.25 {750}

-40+350

Periodical

-

-

-

-

Customized Product

OILES Hiplast

49.0 {500}

0.35 {21}

1.65 {1010}

-50 ~ +200

Non-lub

Hiplast Flange Bushing HPF

OILES Hiplast E

49.0 {500}

0.35 {21}

1.65 {1010}

-50 ~ +200

Non-lub

Customized Product

Back