sqDefinition of Lubricating Condition
(1) Non-lubrication
Without using grease or oil. Only a small amount of grease and oil at assembly. 		(2) Periodical lubrication
Feeding grease or oil periodically		 (3) Lubrication, Forced Lubrication
Feeding oil or grease to sliding faced always: In oil, fed lubrication, splash lubrication, forced lubrication
sqRange Field (Values below are obtained in the air, bushing, shaft revolution)
Product Name Pmax.
N/mm2
{ kgf/cm2}		 Vmax.
m/s
{ m/min}		 PV max.
N/mm2
{ kgf/cm2/m/min}		 Service temperature range
C		 Lub state In the air Under water Under seawater In-chemical liquid Corro-sive Standard Product Code
OILES 80
Represe-ntative grade value		 17.5
{179}		 0.85
{51}		 2.45
{1500}		 -40 ~ +80 Non-lub cir tri tri tri tri
80 Bushing 80B
80 Flange Bushing 80F
80 Washer 80W
80 Bar Stock 80M
80 Centerless Bar Stock 80MG · P
80 Pipe Material 80S
OILES Pillow 80 2.0
{21}		 Intermittent
0.40{24}		 Intermittent
0.50{306}		 -20 ~ +60 Intermittent cir tri tri tri tri
Pillow 80 Rhombic Flange Unit 80FL
Pillow 80 Pillow Unit 80UP
Continuous
0.25{15}		 Continuous
0.30{184}		 Continuous
OILES
PS Bearing		 Allowable maximum loadW
N{ kgf}
11700 ~ 49000
{1190 ~ 5000}		 Allowable maximum number of rotationN
s-1{ rpm}
4.00 ~ 1.50
{240 ~ 90}		 Allowable maximum WN value
N · s-1{ kgf · rpm}
1470 ~ 2450
{8990 ~ 15000}		 -40 ~ +80 ----- cir × × × ×
PS Bearing PST
OILES
Lutech S		 5.0
{51}		 1.65
{99}		 2.45
{1500}		 -40 ~ +80 Non-lub cir tri tri tri tri
Customized Product
OILES
Lutech E		 9.81
{100}		 0.83
{50}		 0.327
{200}		 -40 ~ +80 Non-lub cir tri tri tri tri
Lutech E Bushing LED
Lutech E-02 Bushing LES
Lutech E Bushing Round Bar LEM
OILES
Lutech AT		 Oilless polyacetal plastic base bearing with various lubricants and filler for toner Non-lub cir tri tri tri tri
Customized Product
OILES
Lutech GP		 Mating Material: Plastic
3.92{40}		 Mating Material: Plastic
0.33{20}		 Mating Material: Plastic
0.163{100}		 -40 ~ +80 Non-lub cir tri tri tri tri
Customized Product
Mating Material: Metal
9.81{100}		 Mating Material: Metal
0.67{40}		 Mating Material: Metal
0.327{200}
OILES
#480-02		 19.5
{199}		 0.65
{39}		 3.25
{1990}		 -40 ~ +120 Non-lub cir cir tri tri tri
480 Bar Stock 48M
OILES
#81-12		 5.0
{51}		 0.25
{15}		 0.80
{489}		 -60 ~ +60 Non-lub cir tri tri tri tri
Customized Product
OILES
#81-20		 3.0
{31}		 0.50
{30}		 cir tri tri tri tri
OILES
#83-24		 10.0
{102}		 0.35
{21}		 1.00
{612}		 -40 ~ +140 Non-lub cir tri tri tri tri
83 Washer 83W
OILES
#83-90		 19.5
{199}		 2.45
{1500}		 cir tri tri tri tri
OILES
#88-02		 14.5
{148}		 0.85
{51}		 2.45
{1500}		 -40 ~ +140 Non-lub cir tri tri tri tri
Customized Product
OILES
#88-71		 17.5
{179}		 cir tri tri tri tri
OILES
#88 Elastomer		 Thermoplastic elastomer plastic base engineering elastomer with additive ----- cir tri tri tri tri
Customized Product
OILES
Glitron F		 7.0
{71}		 1.65
{99}		 1.00
{612}		 -200 ~ +200 Non-lub cir cir cir cir cir
OILES Glitron F Bushing 77B
OILES Glitron F Flange Bushing 77F
OILES Glitron F Round Bar 77M
OILES Glitron F Bushing Material 77S · P
OILES
Glitron S		 14.5
{148}		 2.50
{150}		 0.65
{398}		 -60 ~ +200 Non-lub cir cir cir cir cir
Customized Product
OILES
Glitron SE		 14.5
{148}		 2.50
{150}		 0.65
{398}		 -60 ~ +200 Non-lub cir cir cir cir cir
Glitron SE Bushing GSB
Glitron SE Flange Bushing GSF
OILES
50		 Thermoplastic polyurethane base engineering elastomer with additive. Various grades are available. ----- cir tri tri tri tri
Customized Product
OILES
Aramide M/F1		 OILES Aramide M is aromatic poliamide base heat-resistant engineering plastic.
OILES Aramide F1 has the characteristics of OILES Aramide M, high heat-resistance and hardness, and is added with some improvement of wear resistance and low-friction which are the required factors of bearings.		 ----- cir tri tri tri cir
Aramide M Round Bar/ Bushing AMM · AMS
Aramide M Circular Plate/ Plate AMD · AMP
Aramide M Ball ABG
Aramide F1 Round Bar/ Circular Plate AF1M · AF1D
OILES
#250		 20
{204}		 Periodical
3.35{201}		 Periodical
2.45{1500}		 -40 ~ +100 Periodical cir - - - tri
250-07(425-07) Bushing 25S
250-07(425-07) Bar Stock 25M
250-07(425-07) Plate 25P
Oil-lub
15{900}		 Oil-lub
3.25{1990}		 Oil-lub cir - - - tri
OILES
#425		 15
{153}
Value obtained under water, bushing, shaft revolution		 15
{900}
Value obtained under water, bushing, shaft revolution		 4.90
{3000}
Value obtained under water, bushing, shaft revolution		 Normal temperature Forced water lub - cir cir cir tri
OILES
Fiberflon FW		 100
{1020}		 0.15
{9}		 1.20
{734}		 -40 ~ +120 Non-lub cir cir cir tri tri
Fiberflon FW FFB
OILES
Fiberflon TR		 100
{1020}		 0.15
{9}		 1.20
{734}		 -40 ~ +120 Non-lub cir cir cir tri tri
Customized Product
OILES
#470-02		 15
{153}
Value obtained under water, bushing, shaft revolution		 16.5
{990}
Value obtained under water, bushing, shaft revolution		 8.15
{4990}
Value obtained under water, bushing, shaft revolution		 -40 ~ +90 Forced water lub - cir cir cir tri
470-02 Flocculator 47H
470-02 Flocculator UPF
OILES
470-02W
Back