spaceHPFspaceOILES Hiplast Flange Bushing
Please select parts no. referring to the internal diameter and the length to apply.
Ex. Internal diameter 8mm, Length 8mm

HPF- 0808
spacePlease indicate by parts no.
image image image image
* Mating gat does not an axial turn influence, but avoid a point to take load at the maximum, and press fit it.

Mating Shaft I.D. O.D. Flange Thickness
L ±0.3
I.D. After Press-Fitting
(Reference value)
faid faid faiD faiF T 5 6 8 10 12 15 20
4 -0.040
-0.055		 4 5 8 0.5 ±0.05 0405





+0.112
-0.100
5 " 5 6 10 " ±0.02 0505

0510


+0.055
-0.040
6 " 6 7 11 " "
0606
0610


"
8 " 8 9 13 " "

0808

0818
"
10 -0.040
-0.058		 10 11 16 " "


1010
1015
+0.058
-0.040
12 " 12 13 18 " "



1212
1220 "
15 " 15 16 22 " "




1515 1520 "
ballConfiguration of the end of HPF-0405, HPF-0505, HPF-1515, HPF-1520 below flange is straight.
*Tolerance of the internal diameter after fitting is the referential value in case of the condition that the surface of the bushing's outside diameter is contacted to the surface of the housing's internal diameter.
Back