The bracket return spring is installed by the compression spring method. Therefore, this unit is compact and provides good workability and safety.
The ISO spring is applied for the return spring.
Selection of the spring type is available in accordance with weights of bending edges.
Sliding angle is 17.
The special driver (OHD145 series) is provided.
There are two types of installation seats for bending edge.

OHSS160-17D-H OHSS160-17D-M OHSS160-17D-L OHSF100-17D-H OHSF100-17D-M OHSF100-17D-L OHCF45-17D-L

( )Former Part No