|
A thin wall of construction 0.5mm allows interference fit design
|
Standard Product INDEX
| OILES Hiplast Flange bushing |
HPF |
 |
|
 |
OILES Hiplast is a self-lub bearing consisting of bronze expanded metalmesh and Tetrafluoroethylene resin with fillers.
|
|
| Features |
 |
Applicable in self-lub state shows. Low coefficient of friction, outstanding load carrying capacity and wear resistance. The thin wall thickness (0.5mm)construction for compact design |
|
Shows an excellentresistance to chemicals and thermal stability |
|
Very small clearance (to prevent rattling) could beattaiud by installing according to the installationmrthod method specific to Hiplast based on the method of installation unique to Hiplast |
|
Due to the adoption of bronze expamded metal mesh, and excellent thermal conductivity |
|
|
|
| Service Range |
| Lub state |
Self-lub
|
| Service temperature range |
-50~+250
|
P max.
N/mm2{ kgf/cm2} |
49.0{ 500}
|
V max.
m/s{ m/min} |
0.35{ 21}
|
PV max.
N/mm2·/s{ kgf/cm2·m/min} |
1.65{ 1010}
|
|
| Mechanical Property |
| Tensile strength |
JIS K 7113 |
N/mm2{ kgf/cm2} |
34.3{ 350} |
| Stretch |
------ |
% |
30 |
* Values above are nominal values, not standard values.
|
|
| Test data |
| Thrust test (Maximum PV value diagram) |
| <Test conditions> |
| Mating material: |
S45C |
| Testing time: |
100h |
| Lubrication: |
Self- lub |
|
 |
|
| Products | Bearing Top |