bearing   176 / 392



Oiles Hiplast N/E Metallic mesh polytetrafluoroethylene plastic composite bearings Feature ●Serviceable without the need for lubrication. Features superior load resistance and wear resistance. As thin as 0.5 mm, allowing for a compact design. ●Features superior chemical and heat resistance. ●Special mounting method unique to the Hiplast series allows zero clearance. (Backlash prevention) ●Metallic mesh offers lower thermal expansion coefficient and higher thermal conductivity than plastic bearings. ●Press-formed and available in intended forms. ●The conductive grade Hiplast E is available when electric conductivity is required. ※The values shown above are typical values, not the standard values. Tensile strength Elongation JIS K 7113 . 34.3{350} 30 Mechanical properties N/mm{2 kgf/cm2} % Expanded metal Space Mesh image Service range Lubrication condition Service temperature range ℃ Allowable max. pressure P N/mm{2 kgf/cm2} Allowable max. velocity V m/s{m/min} Allowable max. PV value N/mm2・m/s{kgf/cm2・m/min} Dry −50〜+250 49.0{500} 0.35{21} 1.65{1,010} (Hiplast E) Sliding surface Metallic mesh Polytetrafluoroethylene plastic composite with filler 0.50 Electrically conductive Hiplast Hiplast E 175Selection Guide Product Air Bearings Metallic Bearing Multi-layer Bearing Plastic Bearing Information Technical Corporate Profi le Information Slide Shifter