【DO!BOOK・ページリンク】
press_die   103 / 428

BOOKをみる

10秒後にBOOKのページに移動します


Cam Unit ■Additional machining options  The following additional machining options are available. Other processes are also available. For details, consult with OILES sales office. ■Ordering method Additional machining code Ex.: When additional machining is conducted to ODST90-55-10D (Attach the drawing) Additional machining type Ex.: When ODST90-55-10D is used Standard type Code K for keyed type Ex.: When a key is provided to ODST90-55-10D *A special key will be provided. (The key is not attached to the main body) Keyed type: K Code K for keyed type Additional machining code Ex.: When additional machining is conducted to ODST90-55-10D and also a key is provided (Attach the drawing) Additional machining type with a key For Piercing/Trimming/Flanging Just by removing the end plate bolt, the cam slide can be installed/removed to/from the rear side easily. Easy assembly and disassembly ●Remove end plate  . Remove the cam slide to the rear direction. ●Unit disassembly is also available just by removing spring plate  . ■Cutting process range of the cam slide  The range available for cutting the mounting face of the punch and retainer for installation. A B Maximum range available for cutting Series Additional machining Specifying method for an additional machining Specify TUI on the order code: Submit a separate work order sheet (drawing). Tapping dowel holes Partial cutting process Consult with OILES sales office. Others 101