【DO!BOOK・ページリンク】
press_die   93 / 428

BOOKをみる

10秒後にBOOKのページに移動します


Additional machining Consult with OILES sales office. Specifying method for an additional machining Specify TUI on the order code: Submit a separate work order sheet (drawing). Tapping dowel holes Partial cutting process Others ■Order method Additional machining code Ex: When additional machining is conducted to ODCB50-55-10D (Attach the drawing). Additional machining type Ex: When ODCB50-55-10D is used. Standard type Code K for keyed type Ex: When a center key is provided to ODCB 50-55-10D. Keyed type: K Code K for keyed type Additional machining code Ex: When additional machining is conducted to ODCB50-55-10D and also a   center key is provided. (Attach the drawing.) Additional machining type with a key *A special key will be provided. (The key is not attached to the main body.) For Piercing Cam Unit The table on the right indicates the sliding performance that corresponds to the Cam working load by in accordance with the production volume. When the unit is operated for higher efficiency than the specified Cam working load, abnormal wearing or galling may occur on the sliding surface. Selection of appropriate Cam working load by production volume Model Working load (One-million Stroke) Working load (Half-million Stroke) ■Additional Machining options  The following additional machining options are available. Other processes are also available. For details, consult with OILES  sales office. ■Cutting process range of the cam slide  The range available for cutting the mounting face of the punch and retainer for installation. Maximum range available for cutting (mm) Series Max A Max B 91