bearing@@@206 / 392



Oiles 500SP4 High-strength brass bearings with embedded solid lubricant Feature 500SP4 is a self-lubricating bearing with embedded solid lubricant and metal base that conforms to the universally-acknowledged ASTM Standards (C86300). Serviceable without the need for lubrication. Demonstrates high performance under high-load and low-speed operations. Demonstrates superior wear resistance in applications where oil film is seldom produced such as reciprocating motions, oscillation, frequent starts and stops, etc. Superior chemical resistance and corrosion resistance. Relief angle Rake angle Nose radiusi mmj Speed im/minj Cut depth immj Feed imm/revj carbide tooil JISj 5`10K 2`5K 0.40`0.80 100`200 0.05`0.30 0.08`0.30 Lathe turning Condition Cutting tool I.D. class 7 to 8 O.D. class 6 to 7 Length class 8 to 9 Machining accuracy (bushing) Classes here are in JIS standard. This product demonstrates satisfactory performance at the slide surface roughness of 6.3 to 12.5 mRy. Some products require application of solid lubricants on the sliding surface after processing. Contact us for grinding and milling information. The values shown above are typical values, not the standard values. iNote 1jCompressive strength is 0.1% Density Tensile strength Tensile elongation at break Compressive strength Impact strength Hardness Modulus of longitudinal elasticity Co-efficient of linear expansion Thermal conductivity . JIS Z 2241 JIS Z 2241 . JIS Z 2242 JIS Z 2243 JIS Z 2241 . . 7.8 755o77p 12 345o35piNote 1j 19o1.9p HB223 105,000o10,700p 2.2 87.8o0.21p Mechanical properties g/cm3 N/mm2okgf/mm2p N/mm2okgf/mm2p J/cm2okgfm/cm2p . N/mm2okgf/mm2p ~10|5 |1 W/mocal/seccmp Please indicate the type of motion (rotation, reciprocating, rotation & reciprocating) for custom-made products. Solid lubricant, SL401 and SL403 are not lead-free. Service range 500SP4 SL1 Lubrication condition Service temperature range Allowable max. pressure P N/mmo2 kgf/cm2p Allowable max. velocity V m/som/minp Allowable max. PV value N/mm2Em/sokgf/cm2Em/minp Dry |40`{300 0.50o30p 1.65o1,010p 29i150jo296i1,530jp periodic lubrication |40`{150@ 1.00o60p 3.25o1,990p The values in parentheses are static bearing pressures, which are the bearing pressures in applications with no motion or very small motion (0.0017m/s[0.1m/min]). Above values are applicable when solid lubricants SL1 are used. Use the solid lubricant SL464 (lead-free) in water or in environments where the bearings are always exposed to water splashes. The operating temperature range is from -40C to +80C (-40F to 176F). 205Selection Guide Product Air Bearings Metallic Bearing Multi-layer Bearing Plastic Bearing Information Technical Corporate Profi le Information Slide Shifter