bearing@@@207 / 392



Oiles 500SP5 Special high-strength brass bearings with embedded solid lubricant Feature Bears higher loads than the 500SP1. Demonstrates superior wear resistance under high-load and low-speed applications. The values shown above are typical values, not the standard values. iNote 1jCompressive strength is 0.1% Service range 500SP5 SL1 Lubrication condition Service temperature range Allowable max. pressure P N/mmo2 kgf/cm2p Allowable max. velocity V m/som/minp Allowable max. PV value N/mm2Em/sokgf/cm2Em/minp |40`{150 49i170jo500i1,735jp Dry 0.25o15p 1.65o1,010p periodic lubrication 0.50o30p 3.25o1,990p The values in parentheses are static bearing pressures, which are the bearing pressures in applications with no motion or very small motion (0.0017m/s [0.1m/min]). Above values are applicable when solid lubricants SL1 are used. Density Tensile strength Tensile elongation at break Compressive strength Hardness Modulus of longitudinal elasticity. Co-efficient of linear expansion . JIS Z 2241 JIS Z 2241 . JIS Z 2243 JIS Z 2241 . 7.8 785o80p 10 390o40piNote 1j HB235 98,000o10,000p 2.13 Mechanical properties g/cm3 N/mmo2 kgf/mm2p N/mmo2 kgf/mm2p . N/mmo2 kgf/mm2p ~10|5 |1 Please indicate the type of motion (rotation, reciprocating, rotation & reciprocating) for custom-made products. Solid lubricant, SL401 and SL403 are not lead-free. 206 Selection Guide Product Information Plastic Bearing Multi-layer Bearing Metallic Bearing Air Bearings Technical Slide Shifter Information Corporate Profi le