Oiles 500AB Aluminum bronze bearings with embedded solid lubricant ※The values shown above are typical values, not the standard values. （Note 1）Compressive strength is 0.2% Features ●Usable in seawater. ●Has superior heat resistance. ●Not brittle at low temperatures and may be used at very low temperatures. The values in parentheses are static bearing pressures, which are the bearing pressures in applications with no motion or very small motion (≦0.0017m/s[0.1m/min]). ※Above values are applicable when solid lubricants SL1 are used. When you use standard #500AB series in the temperature and over, contact us for more information. Service range 500AB SL1 Lubrication condition Service temperature range ℃ Allowable max. pressure P N/mm｛2 kgf/cm2｝ Allowable max. velocity V m/s｛m/min｝ Allowable max. PV value N/mm2・m/s｛kgf/cm2・m/min｝ Dry −250〜＋400 0.25｛15｝ 1.25｛765｝ 24（100）｛245（1,020）｝ periodic lubrication −40〜＋150 0.50｛30｝ 2.45｛1,500｝ Density Tensile strength Tensile elongation at break Compressive strength Impact strength Hardness Modulus of longitudinal elasticity Co-efficient of linear expansion Thermal conductivity . JIS Z 2241 JIS Z 2241 . JIS Z 2242 JIS Z 2243 JIS Z 2241 . . 7.6 590｛60｝ 15 240｛24｝（Note 1） 25｛2.5｝ HB160 108,000｛11,000｝ 1.6 58.6｛0.14｝ Mechanical properties g/cm3 N/mm｛2 kgf/mm2｝ ％ N/mm｛2 kgf/mm2｝ J/cm｛2 kgfm/cm2｝ . N/mm｛2 kgf/mm2｝ ×10−5 ℃−1 W/m℃｛cal/sec℃cm｝ Please indicate the type of motion (rotation, reciprocating, rotation & reciprocating) for custom-made products. Solid lubricant, SL401 and SL403 are not lead-free. 211Selection Guide Product Air Bearings Metallic Bearing Multi-layer Bearing Plastic Bearing Information Technical Corporate Profi le Information Slide Shifter